The Ultimate! God Hand Nippers

GodHand Ultimate Nipper 5.0 – This is arguably THE nerdiest name for a tool I’ve ever come across, especially with the “5.0” at the end. I like how it even advertise its sharpness level at 5. Apparently this is a hand-sharpened nipper made in small batches hence limited supply and every store that sells it only allows 1 per customer. I just happened to run across it while in Japan last November and saw the godly price tag of I think about 3000 yen and the packaging just made me laugh so I had to try it out. Hell why not. Stuff like this usually have its merits.

dsc00070

At the same time, I also picked up another Tamiya side cutter. My usual go-to brand of cutters. Turns out I have like 5 of these now.

dsc00069

A cover for your God Hand Ultimate Nippers 5.0.

dsc00075

Comparison of the two. The GodHand is the shortest as well as the thinnest of all the nippers. It is also the lightest too.

dsc00076

Here it is side by side by side with the other Tamiya cutters.  I don’t think I understand what is the difference between the two Tamiya cutters though- they are both called Sharp-pointed side cutter.

dsc00073dsc00072

Yea sure, the left one might have a slightly longer tip but both work about the same. If anyone knows the specific purpose for the difference, please kindly educate me ^^;.

dsc00062

Back to the GodHand… the edges are different from each other. Upon a little research, it seems that this nipper is revered for its godliness of cutting nubs clean off the gates, flush cut, saving time, and impressing girls. Time will if the nipper will live up to the last one.

I’ve actually used this nipper with the HG Panda’gguy and the HG Destiny so far. This thing SLICES the plastic. Not pinch. Not crush. Slice. Shear. You wouldn’t realize the difference until you try, feel, and see it in person. The best indicator is the relative lack of stress marks left behind almost as if I’ve already used a knife to shave off the nub. However, I still feel better going over the spot with my actual knife just out of habit and to make the nub is clean. At the very least, I know there won’t be any “craters” if I cut off the nub with this cutter flush against the part. So I am not saving all that much time but at least I can do a cleaner job.

Sorry for not having as pictures of cut plastic – My camera couldn’t get close enough to make out the results clearly.

dsc00064

Now is it worth it? I’d say it is worth it to have in your arsenal for sensitive parts like V-fins, and outer surface parts where you don’t want to risk nub marks on. It is also good for darker color parts where the stress mark comes out white and this doesn’t leave much or any. I wouldn’t replace all my nippers with this though since I am not sure about its durability or longevity. As far as Gunpla goes, I am only using this nipper on surface armor parts and Tamiya side cutters for everything else.

I’ll update on this cutter later after some more extensive usage.